Model 125 -- Corrosion Monitoring Station
For aluminum, steel, composite and wood hulls. Complete installation kit includes: 125 (A, S or B) Monitor Meter and RE-104 Reference Assembly.
| Model 125(A, S or B)-0: The -0 display has no shaft selector switch. | $1,328.00 |
| Model 125(A, S or B)-1: The -1 display has a shaft selector switch for one shaft | $1,405.00 |
| Model 125(A, S or B)-2: The -2 display has a shaft selector switch for two shafts | $1,412.00 |
Model 126 -- Corrosion Monitoring Station
For aluminum, steel, composite and wood hulls. Complete installation kit includes: 126 (A, S or B) Monitor Meter and multiple RE-104 Reference Assemblies. Unit can be customized to monitor multiple regions of a monohull vessel, or multiple hulls on a catamaran or trimaran vessel.
| Model 126(A, S or B)-1: The -1 display has a hull region selector switch for up to two hull regions | $1,610.00 |
| Model 126(A, S or B)-2: The -2 display has a hull region selector switch for up to three hull regions | $1,787.00 |
Model 208 -- Automatic Control and Monitoring System
For wood and fiberglass hulls to 45 feet LOA. Complete installation kit includes: 208 Control Unit, RE-206D Reference Assembly, two ZI-1 Insulated Anode Mounting Studs & one SB-6B Shaft Sensing Wiper Assembly (MODEL 208-1) or two SB-6B Shaft Sensing Wiper Assemblies (MODEL 208-2).
| Model 208-1 | $1,124.00 |
| Model 208-2 | $1,241.00 |
Model 620/630FM -- Automatic Impressed Current Control and Monitoring System
For boats w/aluminum I/O drives, aluminum jet drives, large outboard motors & aluminum hulls to 30' LOA. Complete installation kit includes: 620A Controller, two color LED display, reference cell & ceramic coated, titanium anode.
| Model 620A: for marine aluminum hulls and structures | $1,924.00 |
| Model 620S: for steel hulls and steel and iron structures | $1,924.00 |
| Model 620B: for copper & its alloys, stainless steel, lead, etc | $1,924.00 |
| Model 630(A, S or B)FM: Flush mounting anode & reference cell | $2,162.00 |
Model 700 Series -- Automatic Impressed Current Control and Monitoring Systems*
For wood, fiberglass, steel and aluminum hulls 50 feet to 300+ feet LOA. Prices for 700 series ICCP systems are quoted to meet the individual requirements of each vessel.
* Information must be provided on underwater structures of vessel prior to ordering. Use Electro-Guard Vessel Data Acquisition Form (VDAF) to supply this information. The VDAF can be printed from the "Technical Support" page. 700 Series systems are pre-engineered for the specific vessel by Electro-Guard, Inc. -- this service is included in price of the system.
SRA Series Slip Rings -- Provide Low Resistance Electrical Contact To Shafts & Propellers
Sterling silver slip ring assemblies for propeller shaft sizes 1.75" through 10" -- all slip ring assemblies are built to meet the cathodic protection current load required by a vessel's shafts & propellers. The current requirement is determined from information supplied on our VDAF form.* Prices for the SRA Series slip rings will be quoted on request.
Model 902 -- Corrosion Test Instrument Kit
Use the 902 test instrument to: determine effectiveness of cathodic protection, check bonding system integrity, check for AC shoreline interference, trouble shoot AC & DC electrical systems. The kit includes: Ampprobe 5XP-A digital multimeter, protective carrying case w/compartments for test probes & leads, reference probe w/20' of test lead wire, a 25' test lead extension, a hardened steel test probe, instructions for the multimeter and for corrosion testing.
| Model 125(A, S or B) -0 Monitor Meter only | $1,144.00 |
| Model 125(A, S or B) -1 Monitor Meter only | $1,235.00 |
| Model 125(A, S or B) -2 Monitor Meter only | $1,245.00 |
| Model 126(A, S or B) -1 Monitor Meter only | $1,321.00 |
| Model 126(A, S or B) -2 Monitor Meter only | $1,376.00 |
| Model 208-1 Control Unit only | $798.00 |
| Model 208-2 Control Unit only | $852.00 |
| Model 620/630 Control Unit only | $565.00 |
| RE-104 Reference Assembly: (For 125 and 126 monitors, 620 and 700 Series systems) | $154.00 |
| RE-206D Reference Assembly: (For 208-1 & -2 and 210-1 & -2 Controllers on wood and fiberglass hulls) | $198.00 |
| RE-109 Reference Assembly: (For 630-FM Flush Mount ICCP Systems) | $370.00 |
| SB-6B Propeller shaft wiper brush assembly -- Standard Duty | $86.00 |
| HD-SB Propeller shaft wiper brush assembly -- Heavy Duty | $107.00 |
| WM-1 Propeller Shaft Wiper Mount | $26.00 |
| PS-1 Test Probe Set: (Includes: RP-2, RPEX-25 and PP-1) | $344.00 |
| RP-2 Reference probe: (For 902TM) | $106.00 |
| RPEX-25 Reference probe extension - 25' long: (For 902TM) | $89.00 |
| PP-1 Test Probe w/hardened steel point: (For 902TM) | $148.00 |
| ZI-1 Insulated Anode Mounting Stud | $35.00 |
| ZI-5 Isolation Washer Set | $60.00 |
| ZI-6 Isolation Spacer Ring | $7.00 |
| ZI-7 1/2" Insulated Stud with Insulating Nut Set | $107.00 |
| ZI-8 1/2 | $7.00 |
| ZI-9 1/2" Insulated Bolt with Insulating Washer Set | $116.00 |
| 6B-1 Replacement shaft wiper brush shoe: (for SB-6B) | $43.00 |
| 6B-2 Replacement shaft wiper brush shoe: (for HD-SB) | $54.00 |
| SRB-1 Replacement silver slip ring brush | $82.00 |
| SRB-2 Replacement slip ring brush holder | $54.00 |
| RE-100 Replacement reference electrode: (For RE-107 reference assembly) | $33.00 |
| RE-200 Replacement reference electrode: (For RE-206D reference assembly stud #2) | $49.00 |
| MR-1 Replacement reference electrode: (For RE-206D reference assembly stud #1) | $23.00 |
| RE-400 Replacement reference electrode: (For RE-109 reference assembly) | $142.00 |
