Retail Price List -- March 1, 2011
Model 110 -- Corrosion Monitoring Station
For aluminum, steel, composit and wood hulls. Complete installation kit includes: 110 (A, S or BR) Monitor Meter and RE-107 Reference Assembly.
| Model 110A -- for marine aluminum hulls and structures | $474.00 |
| Model 110S -- for steel hulls and steel and iron structures | $474.00 |
| Model 110BR -- for copper & its alloys, stainless steel, lead, etc. | $474.00 |
Model 125 -- Corrosion Monitoring Station
For aluminum, steel, composit and wood hulls. Complete installation kit includes: 125 (A, S or B) Monitor Meter and RE-104 Reference Assembly.
| Model 125(A, S or B)-0 The -0 display has no shaft selector switch. | $840.00 |
| Model 125(A, S or B)-1 The -1 display has a shaft selector switch for one shaft | $890.00 |
| Model 125(A, S or B)-2 The -2 display has a shaft selector switch for two shafts | $926.00 |
Model 208 -- Automatic Control and Monitoring System
For wood and fiberglass hulls to 45 feet LOA. Complete installation kit includes: 208 Control Unit, RE-206D Reference Assembly, two ZI-1 Insulated Anode Mounting Studs & one SB-6B Shaft Sensing Wiper Assembly (MODEL 208-1) or two SB-6B Shaft Sensing Wiper Assemblies (MODEL 208-2).
| Model 208-1 | $829.00 |
| Model 208-2 | $945.00 |
Model 210 -- Automatic Control and Monitoring System
For wood and fiberglass hulls 45 - 65 feet LOA. Complete installation kit includes: 210 Control Unit, RE-206D Reference Assembly, four ZI-1 Insulated Anode Mounting Studs and one SB-6B Shaft Sensing Wiper Assembly (MODEL 210-1) or two SB-6B Shaft Sensing Wiper Assemblies (MODEL 210-2).
| Model 210-1 | $1,209.00 |
| Model 210-2 | $1,310.00 |
Model 620 -- Automatic Impressed Current Control and Monitoring System
For boats w/aluminum I/O drives, aluminum jet drives, large outboard motors & aluminum hulls to 30' LOA. Complete installation kit includes: 620A Controller, two color LED display, reference cell & ceramic coated, titanium anode.
| Model 620A -- for marine aluminum hulls and structures | $685.00 |
| Model 620S -- for steel hulls and steel and iron structures | $685.00 |
| Model 620B -- for copper & its alloys, stainless steel, lead, etc | $685.00 |
| Model 620(A, S or B)FM -- Flush mounting anode & reference cell | $985.00 |
Model 700 Series -- Automatic Impressed Current Control and Monitoring Systems*
For wood, fiberglass, steel and aluminum hulls 50 feet to 300+ feet LOA. Prices for 700 series ICCP systems are quoted to meet the individual requirements of each vessel.
*Information must be provided on underwater structures of vessel prior to ordering. Use Electro-Guard Vessel Data Acquisition Form (VDAF) to supply this information. The VDAF can be printed from the "Technical Suport" page & faxed to (530) 926-4221. 700 Series systems are pre-engineered for the specific vessel by Electro-Guard, Inc. -- this service is included in price of the system.
SRA Series Sliprings -- Provide Low Resistance Electrical Contact To Shafts & Propellers
Sterling silver slip ring assemblies for propeller shaft sizes 1.75" through 10" -- all slip ring assemblies are built to meet the cathodic protection current load required by a vessel's shafts & propellers. The current requirement is determined from information supplied on our VDAF form.* Prices for the SRA Series slip rings will be quoted on request.
Model 902 -- Corrosion Test Instrument Kit
Use the 902 test instrument to: determine effectiveness of cathodic protection, check bonding system integrity, check for AC shoreline interference, trouble shoot AC & DC electrical systems. The kit includes: Fluke model 110 digital multimeter, protective carrying case w/compartments for test probes & leads, reference probe w/20' of test lead wire, a 25' test lead extension, a hardened steel test probe, instructions for the multimeter and for corrosion testing.
| Model 902TI | $389.80 |
Individual Items
| Model 208-1 Control Unit only | $519.00 |
| Model 208-2 Control Unit only | $561.00 |
| Model 110 (S, A, or BR) Monitor Meter only | $321.00 |
| RE-104 Reference Assembly (For 620 and 700 Series systems) | $154.00 |
| RE-107 Reference Assembly (For 500, 501, 502, Controller and 110 (S or A) Monitor Meters on wood, fiberglass, steel and aluminum hulls) |
$174.00 |
| RE-206D Reference Assembly (For 208-1 & -2 and 210-1 & -2 Controllers on wood and fiberglass hulls) |
$197.50 |
Accessory Items
| SB-6B Propeller shaft wiper brush assembly -- Standard Duty | $47.95 |
| HD-SB Propeller shaft wiper brush assembly -- Heavy Duty | $67.95 |
| ZI-1 Insulated anode mounting stud | $28.30 |
| WM-1 Shaft wiper mount | $19.75 |
| RP-2 Reference probe (For 902TM) | $95.00 |
| RPEX-25 Reference probe extension - 25' long (For 902TM) | $70.50 |
| PP-1 Test Probe w/hardened steel point (For 902TM) | $87.50 |
Replacement and Spare Parts
| 6B-1 Replacement shaft wiper brush shoe (for SB-6B) | $18.60 |
| 6B-2 Replacement shaft wiper brush shoe (for HD-SB) | $29.80 |
| SRB-1 Replacement silver slip ring brush | $58.70 |
| SRB-2 Replacement slip ring brush holder | $54.00 |
| RE-100 Replacement reference electrode (For RE-107 reference assembly) |
$20.70 |
| RE-200 Replacement reference electrode (For RE-206D reference assembly stud #2) |
$29.75 |
| MR-1 Replacement reference electrode (For RE-206D reference assembly stud #1) |
$15.50 |